Zoomlion 52m Concrete Pump Truck High Working Stability With 4 Axle X - Leg

Zoomlion 52 Meters Concrete Boom Pump

Zoomlion 52 meters concrete pump, Isuzu chassis, 4 axle x-leg, classical 6 booms, high working stability.
The original used zoomlion concrete pump, the condition is very good and normal working. Equipment evaluation and Restorative maintenance. Maintenance completed oil and filter change, systematic debugging.

Safety issues should be paid attention to in the construction of commercial concrete pump

• Prepare purge pipes, purge supplies, ball catcher and related devices. Before operation of second hand pump truck, the cement mortar prepared according to regulations must be used first to lubricate the pipe. Irrelevant personnel must leave the pipeline.
• All the supporting legs should be extended and supported. The placing boom can be rotated after it is lifted from the bracket. The placing boom should be extended in sequence. It is strictly prohibited to lift or drag objects with a placing boom.
• When the cloth bar is fully extended and supported, it is strictly forbidden to move the truck. Do not start the placing boom before fixation. When moving in the work, the upper part of the placing boom should be folded and fixed, and the moving speed should not exceed 10km/h. The pipe should not be longer than the specified diameter, and the hose should be fastened with safety rope.
• All kinds of instruments and indicators should be monitored at any time, and any abnormality should be adjusted or handled in time. In case of pipe blockage, the anti-plump shall be adopted to return the 52m concrete pump to the hopper. If necessary, the pipe shall be dismantled to remove blockage.
• Pumping work shall be continuous. If you stop pumping for a long time, you should reverse pump once or two times, and then pump the material. A certain amount of concrete shall be kept in the hopper during pumping.
• Control switch, regulating handle, hand wheel, control lever and cock shall be reset at all positions. Hydraulic system should unload.
• Send the pistons on both sides to the cleaning room and apply grease to them.